When are UDEs not the Right Answer?

As we have seen, UDEs can be a powerful way of passing data between processes, but they are no Silver Bullet, no Panacea, no Balm of Gilead, no … well, you get the point. Given that we aren’t going to do something silly like only use one method for passing all our data, we need to ask an important question: When should you consider the other techniques?

Knowing What is Important

The reason people choose one thing over another (or at least why people should choose one thing over another) is that they are looking for better performance — however you might define that word. But before we can say one technique is better than another, we need to understand the key features of each technique. With that knowledge in hand we can then apply those techniques in ways where the features work to our advantage, but we avoid problematic side-effects. So, since our present concern is data passing, let’s consider the issue I call, immediacy.

There are times when something needs to happen as quickly as possible after an input value changes. In the hardware world this sort of condition is called an edge trigger and as a system architect working with them you are often primarily interested in when the change occurred. Of course an event can carry data, but the key distinguishing factor for this sort of communications is timing. These are the sorts of signals for which UDEs are an excellent choice because UDEs are very good at telling remote processes that something has changed.

On the other hand there are signals where functionally it doesn’t matter really when they changed. All the code really cares about is what their value is the next time they are used. These are the signals that you could pass with a UDE, but to do so would be wasteful of the receiving process’ time. Remember that when an event fires any process registered to receive that event has to stop what was doing to handle the event and then return to what it was doing before it was interrupted — even though it fundamentally doesn’t care when the value changes. Although these diversions might be small, they do take some time and so can effect loop timing. Moreover, if you have something running in a Timeout event a UDE (or any other type of event) can drastically effect the timing of when the next timeout occurs. Remember that a timeout, of say 1000 msec, does not mean that the code in it will execute every 1000 msec. Rather, the event triggers when the time since the last occurrence of any event exceeds 1000 msec.

In fact, in this situation, if you have a UDE that fires every 500 msec, the timeout will never occur. To summarize this point, a good way to think about this is that an event actually carries two pieces of information: data and timing. What we need sometimes, though, is just the data.

Just the Data

The good news is that LabVIEW offers a variety of options for passing just the data. The oldest (and still very useful) way is with a Functional Global Variable (FGV), also sometimes called a LabVIEW 2 style global. A FGV uses an uninitialized shift register to hold data in memory. More recent additions to our arsenal include feedback nodes, data value references (DVRs) and shared variables.

Your choice between these options should be driven by memory and performance concerns. A FGV is easy to create and very flexible, but if the data being buffered is large, they can suffer performance issues due to copying of memory buffers. A DVR on the other hand, is a little trickier to use because there is a reference you have to pass around, but is very efficient. With large datasets i will often split the difference and combine the two: I will use the DVR to store the data, but use a FGV to buffer and store the DVR reference. Although it is sort of overkill for the data that I will transferring, I’ll show you the technique in the following example.

What We’ll Build

Right now in the testbed application the delay between sampled is hardcoded to 1000 msec. So to demonstrate the passing of non-time-critical data, let’s modify our code to allow the UI process to vary the delay between data samples.

The first thing we want to do is create the buffer we will use to transfer the data. So in the project directory create a subdirectory named _buffers and inside it create a subdirectory named Sample Rate. Finally inside that subdirectory create a LabVIEW library named Sample Rate.lvlib and two more subdirectories called _subVIs and _typedefs. If you have been following this blog from the beginning, this arrangement should look familiar as it is very similar to what we did for organizing UDEs — and we are repeating it here for all the same reasons (unique name space, access control for subVIs, etc.).

The Buffer

The first real code will be the buffer and this is what it looks like:

DVT-Based Data Cache

As promised, it has the basic structure of a FGV, but the global data is the DVR reference. Note also that the DVR’s datatype is a cluster (typedef’d of course) that contains a single integer. The typedef is saved in the typedef directory with the name Data.ctl and the buffer is saved in the subVI directory with the name Buffer.vi. The two subdirectories have been added to the library and the access scope for the subVI directory is set to Private.

Reading and Writing the Buffer

With the buffer itself created we need to add to the library a pair of publicly accessible VIs for accessing it — and here they are. First the read:

Read Write DVR Data Cache

…and now the write:

Write DVR Data Cache

Note that if anything about the data or how it is stored would ever need to change in the future, this one library would be the only place in the code that would be impacted.

Modifying the Testbed

All we have to do now is modify the testbed to add in the logic that we just created, but thanks to the infrastructure that we have created, that will be an easy task. In fact it will take exactly three changes — total modification time, less than 5 minutes.

  1. Add an I32 control to the front panel of the display process and create a value change event for it. In the event handler for the value change, wire the NewVal event data node to the input of the buffer write VI.

    Sample Period Value Change Event

  2. Setup the initialization by adding a property node to fire the value change event using the default control value.

    Initialize Sample Period Event

  3. Add the buffer read to the acquisition VI as shown.

    Modified Acquisition Loop Timing

That’s all there is to it. Another good point for this approach is that because the DVR’s datatype is defined as a typedef, you can make changes to the data in the buffer without recreating everything. In addition, because the data is a cluster, the existing code won’t break if you add another value to the cluster. Go ahead and give it a try. Open the typedef and add another control to the cluster. After you have saved the change note that the the existing code did not break.

Check here for the updated project:
http://svn.notatamelion.com/blogProject/testbed application/Tags/Release 6

Oh yes, one more thing. Remember how we created a zip archive holding the basic template files for a UDE? It might be a good idea to do the same thing for this structure. Until next time…

Mike…

Leave a Reply